LMAI Brand owners’ event, a roaring success!

LMAI Brand owners’ event, a roaring success!

Label manufacturing continues to evolve into different tangents involving diverse technologies. The retail selling scenario is undergoing a sea change as also the need to make consumers repetitive buyers of branded products. The times of shopkeepers promoting sales of their preferred brands is transforming rapidly into one where the consumers decide on their own what to lift off the shelf, given the modern retail growth. In view of growing need for printers having capabilities to produce decorative and innovative labels that catch the consumer’s eye providing brand security and enhancing the brand’s image as well; there is an imperative need for brand owners to connect with the label converters. In such a scenario, India’s label association, Label Manufacturers Association of India (LMAI) organised a program exclusively for label printers titled, “Brand owners’ perception of labels in changing scenario” at hotel, The Orchid, Mumbai. The program was attended by over 100 delegates comprising mostly of top end label printing companies, packaging professionals of renowned brands, sponsors and LMAI board members. It was an effort to promote the positive escalation of labels in a changing scenario bringing the stake holders at a single platform to strategise a win-win solution.

Following prominent speakers shared their thoughts:
 
Suresh Gupta Former Chairman Huhtamaki-PPL
Somnath Chatterjee GM Procurement – Pernod Ricard, Segment: Liquor
Anil Choubey Head Packaging Dev.-Patanjali Ayurved Ltd. Segment: FMCG
Ajay Bapat Associate Dir. Packaging Dev. Emcure Pharmaceuticals Ltd. Segment: Pharma
Vishwas Jangam Packaging Dev. Mgr. at Future Consumer Enterprises Ltd. Segment: Retail
Prabir Das Head – Packaging Tech. Services Mylan Laboratories Limited segment: Pharma
Ainain Shahidi, Director SIES School of Packaging was special invitee who moderated the event
Other Packaging industry professionals who attended the program include Fazal Farooqui DGM Packaging Development Zydus Wellness formerly Kraft Heinz Company, Sunil Patil-HPCL and Ms. Koel Bhadra-Packaging development Professional.
 

Delivering the keynote address Suresh Gupta, former Chairman Huhtamaki-PPL expressed his philosophy of success for the entrepreneurs present, “Sound fundamentals are enshrined in Good values; being Good compassionate people, knowing knowledge is power to be used with integrity, ever improving quality and service and continuous innovation makes for happy customers. Be the flag bearer of standard in your industry” He further cautioned printers to be ready; for the present equipment to become outdated in 5 years due to fast evolving label technologies and be ready to invest in new equipment after properly understanding the technology. Impressing upon the fact that Digital printing is the future.

Prabir Das, Head Packaging Technical Services (OSD) of Mylan laboratories spoke about Importance and effectiveness in Product-People Connectivity where packaging is the connector and labelling is the communicator. It is a necessity therefore to design the packaging that establishes the connection and the regulatory and statutory information is communicated through the label.

Somnath Chatterjee, General Manager Procurement of Pernod Ricard said that labels must appeal delivering a lifestyle message. He also stressed the need to reduce wastages. Referring to the increase in counterfeiting in liquor, Somnath invited printers to offer them unique solutions even though they themselves are already implementing security measures to safeguard the interests of there consumers. He felt that it is important to get all stakeholders in label production to ponder over the needs with the end user consumer in mind. 

Ajay Bapat, associate director packaging development, Emcure Pharmaceuticals informed about the necessity of right information, cleanliness and the need for smart labelling. 

Anil Choubey Head of Packaging Development Patanjali Ayurved Limited spoke the need for effective, sustainable and eco friendly labels and would be looking forwards to printer suppliers offering such products. 

Vishwas Jangam Packaging Development Manager of Future Consumer Enterprises Limited the company that owns Big Bazar chain of retail malls and stores spread across India, dwelled on specific needs of designs for labels on the shop shelves. Modern day retail that is growing at 21% CAGR needs the attention of the consumer who makes an impulsive buying decision in just about 12 seconds.

The event was moderated by Ainain Shahidi a packaging industry professional and now the director of SIES School of Packaging. He enthralled the audience with his amazing Urdu poetry and couplets while leading the flow of event. He also apprised the audience about the activities of SIES School of packaging. 

Before presenting vote of thanks Manish Desai past President LMAI, announced the next LMAI conference at Grand Hyatt Hotel, Kochi on July 2019, the Indian label Industry’s most important and biggest event.

The event was sponsored by Avery Dennison and SMI Coated Papers as gold sponsors and Creative Graphics as silver sponsors. Manish Desai while thanking the audience felicitated with mementos the speakers, the moderator Ainain Shahidi, the packaging professionals who attended and Harveer Sahni who curated this event with help of LMAI leadership team. Leading printers who attended included Amar Chhajed from Huhtamaki-PPL, Vivek Kapoor-Creative Labels, Chandan Khanna-Ajanta packaging, Manish Desai-Mudrika Labels, Tejas Tanna-Printmann, Arvind Shekhar-Sai Packaging, Aditya Patwardhan, Mahendra Shah-Renault Paper, Sandeep Zaveri- Total Prints, Naveen Goel-Any Graphics, Rahul Kapoor-JK Fine prints, Patricia-Letragraphix, Sandhya Shetty-Synergy Packaging, Anil Namugade-Trigon Digital, Sanjay Purandre -Shree Ganesh Graphics and so many more. The event was media covered by and attended by Naresh Khanna and his team from Packaging South Asia, Pradeep Saroha Country head for Tarsus, Aakriti Agarwal- Indian editor of Labels and labelling UK and Noel D’Cunha and his team form Printweek!

Written by Harveer Sahni, Chairman Weldon Celloplast Limited New Delhi March 2019
Print Publications are free to reproduce this article giving credit to author Harveer Sahni

Labels: Sustainability, Environmental protection and Circular economy !

Labels: Sustainability, Environmental protection and Circular economy !

Almost forty years ago, when Iwas just a commercial siliconiser, people at large did not understand what release paper or silicon paper was. I would jokingly explain it was a product, a protective paper behind a sticker, that would eventually go into wastepaper basket. In real terms the release liner, would be disposed-off in landfills or burnt adding smoke and gasses to the environment impacting it adversely.

Time has changed, concern for environment is a necessity and cannot be taken lightly as a joke. We are responsible for leaving behind a legacy of a cleaner and liveable environment for generations that follow us.
We need to make our manufacturing programs, sustainable. Sustainability means giving back to mother earth what we take from it or reduce drawing the resources that we cannot replenish forthwith cut down generation of industrial waste. Unfortunately, 50% of all that self-adhesive label industry produces goes as waste in terms of waste matrix and release liners. While globally many endeavours are being adopted to reduce liner waste yet in India a lot needs to be done. Switching over to liner less labels where-ever possible, helps but not much work is done in this direction. Using thinner filmic liners does result in reduced tonnage of liners and their recyclability. During this period many a top-end printer has started using clear on clear filmic label materials aiding sustainability to some extent. Global leaders in Labelstocks Avery Dennison has initiated a program to collect and recycle silicone release liners in India, it is a step in the right direction. But given the size of the country and geographical spread of label units, it is a gigantic task. Other than this some printers have adopted waste management by shredding waste and compacting it for use as fuel in boilers and other applications, this is only a miniscule portion of the Industry. Largely, the waste is still sent to landfills or is incinerated. In times to come legislation will come to make sustainability and environment safety an imperative. It is time that the label and print fraternity at large must understand that not only the need but also the larger implications terms sustainability, recyclability, circular economy, environmental protection, etc.

The 2030 Agenda for Sustainable Development, adopted by all United Nations Member States in 2015, provides a shared blueprint for peace and prosperity for people and the planet, now and into the future. At its heart are the 17 Sustainable Development Goals (SDGs), which are an urgent call for action by all countries – developed and developing – in a global partnership.

They recognize that ending poverty and other deprivations must go together with strategies that improve health and education, reduce inequality, and spur economic growth – all while tackling climate change and working to preserve our oceans and forests. The Sustainable Development Goal number 12 states; worldwide material consumption has expanded rapidly, as has material footprint per capita, seriously jeopardizing the achievement of Sustainable Development Goals. Urgent action is needed to ensure that current material needs do not lead to the over extraction of resources or to the degradation of environmental resources, and should include policies that improve resource efficiency, reduce waste and mainstream sustainability practices across all sectors of the economy. In our labels and packaging industry this is an imperative that needs to be attended to because the percentage of waste generated is high, going to landfills. Some companies do incinerate or send the waste generated as matrix or side trim to kilns for use as fuel. This may look good management but in the longer run we are putting gasses into the air from the different materials going into the manufacture of labelstocks viz.; paper, film, primer coats, silicone, adhesive etc. Each component will produce different type of emissions that have in unison no single solution to treat them. Thus, there is a need for reducing the waste generated, use recyclable materials, reduce the energy consumption etc. to become more sustainable.

The label industry globally has been looking at the possibility of recyclability and reusability of the waste matrix or that of the different components of labelstocks. Since release paper is one item that has its usability only until the label is dispensed to be applied on to the product, after that it ends up as waste. Over the years there have been many solutions tried to reduce the impact of this liner waste on the environment. The used liner would either go to landfills or incinerated and in both cases it its impact was adverse. Due to the silicone coating on the paper biodegradability in landfills was an issue as silicone after crosslinking becomes inert.

For the same reason paper mills would not buy this waste for re-pulping and making fresh paper. Initial steps taken in reducing the liner waste were replacing the paper liners with thinner filmic liners thereby reducing the tonnage of paper and moreover the waste liner can be remoulded. This was a positive sign, but large-scale shift has not happened in a long time because of additional increased investment in equipment and tooling. There have been efforts to go linerless in producing labels but the inability to do custom shapes die-cutting and high-speed label dispensing on automatic packaging lines have not produced a lasting solution. Efforts and development in this direction are going on and we hope one day the industry can shift to self-adhesive labels without having release liners to dispose off, becomes a reality. At Labelexpo Europe 2019, four companies Ritrama, Omet, Spilker and ILTI came together to offer their “Core Linerless Solutions”, other companies like Catchpoint are also making strong efforts in this direction, only time will tell how many brand owners move in this direction and prompt their label vendors to offer the linerless label solutions. Some paper mills in Europe have now devised process of de-siliconising release paper and then re-pulping it to make fresh paper but the collection and delivery to the mills from the printing companies widely spread over large geographical locations is a logistic challenge. However still substantial volumes have started to be reprocessed. In India in recent times as mentioned above Avery Dennison has initiated support to a program in which collection of release liners is outsourced to a vendor and then sent to a mill who have devised a process to re-pulp and convert to paperboard. These are positive steps.

The menace of waste is gigantic and it has become an absolute emergency to counter it. Governments have woken up to act against generation of materials going to landfills. It is preferred that whatever waste is generated in industrial process should be gainfully recycled for usability to achieve the benefits as described in circular economy.

As per a report published in thehindubusinessline.com of 19th September 2019, leading consumer products companies such as Coca-Cola India, PepsiCo India and Bisleri among others have decided to come together to launch a first-of-its-kind packaging waste management venture in the country. The venture, which is called Karo Sambhav, will focus on creating a formal eco-system for collection of post-consumer packaging and optimising material recycling processes. Commenting on the endeavour, T Krishnakumar, President, Coca-Cola India and South-West Asia added, “Through our vision, World Without Waste, we want to ensure that all our packaging material goes for recycling and not to landfills.” Another report appearing in Live Mint 2nd October 2019 states; The government may soon roll out stringent norms and impose heavy fines on corporates, including hospitality industry, mobile manufacturers and packaging industry, for failing to stop use of plastic. Under the Extended Producer Responsibility (EPR) scheme, which the government plans to implement effectively, manufacturers, brand owners, and importers of products should realise and bear responsibility for environmental impact of their products through the product life-cycle. Many of the large FMCG companies have started adopting the requirements of EPR. These are other positive steps taken to eradicate waste to landfills to a great extent.

Besides the liner there is the waste matrix which has the adhesive and various kinds of face materials that include uncoated, coated, metallised, coloured, metallised papers, laminates or films with metallisation or topcoats. Side trims are also generated at some label converting units and most labelstock manufacturing units. With increasing prices of real estate besides an environmental issue, the side trims and matrix call for large amount of space to store until disposed off, putting additional pressure on resources. For this reason, larger label companies are shredding and compacting the waste to sell as fuel for boilers, furnaces and cement kilns.

There are some innovative entrepreneurs who convert this waste into pallets, floor tiles, wall panelling and some small furniture items. It is interesting to see such endeavours.

Circular economy packaging is another buzzword when we talk of sustainability and environmental protection. A circular economy is an economic system aimed at eliminating waste, continual use and recycling of resources to re-engineer products that are preferably not downgraded. It is contrary to the earlier system “traditional linear economy” according to which the aim was ‘take, make, dispose’ model of production to achieve increased usage of all inputs.

Labels are the face of any product and in time of growing organised retail and in view of stringent consumer protection laws labels provide the much-needed statutory information, besides becoming the marketing tool for any product. In such a scenario we need to design labels in manner that they are able, to be a part of recycling process of the package. For instance, on a PE (polyethylene) container we should have a PE label only so that the whole package is mono-polymer and can be effectively reprocessed and recycled. Multi-polymer plastics are neither recyclable nor biodegradable. It is normal in India that we see ragpickers collect the mono polymer milk pouches but leave behind the fancy multi-layered pouches of instant foods and snacks littered around. This is because the monolayer plastics are resaleable for convenient recycling. Similarly, a paperboard carton should have a paper label.

Sustainability or circular economy must be in the conscience of all manufacturers, it does not advocate compromising safety or user experience of any product. It also does not mean increased cost of inputs. It is a mindset to create products that make life sustainable and do not deplete resources available to humans. There is need to replenish what we extract from our environment and establish a legacy for generations that follow for staying committed to the cause. It is a cause that is impacting humanity across the globe and all efforts to make public of all races and countries aware of the situation and need to contribute towards this issue in unison are necessary.
Written By Harveer Sahni Chairman Weldon Celloplast Limited, New Delhi India February 2020

The untold story of Suresh Gupta former Chairman Huhtamaki-PPL

The untold story of Suresh Gupta former Chairman Huhtamaki-PPL

 

Thirty-one years after joining Huhtamaki-PPL (formerly Paper Products Limited or PPL), Suresh Gupta retired as its Executive Chairman. He joined the company in 1987 at a difficult time for the company, as business had slowed down since 1980 and they had to sell off their paper mill. When Suresh became a part of PPL the turnover of the company was just Rs.24 Crore and with a large workforce of 700 employees. He led the company until his retirement with sales reaching almost 100 times to Rupees 2300 Crores and the number of people working rose to 3500! Huhtamaki-PPL is now the largest producer of printed and finished flexible packaging materials in India. Under his leadership, the company, led not only PPL’s but also India’s foray into diverse label technologies as well. They were the very first entrant into shrink sleeve labels in association with Fuji Seal of Japan. Today Huhtamaki-PPL is the largest player in label manufacturing segment in India with their label sales touching 400 Crores which includes Pressure sensitive labels, Shrink Sleeves, Wrap arounds, In-moulds and other label forms. They are vendors to the virtual “who is who” in the Indian branded consumer goods and pharmaceutical industries. In pressure sensitive adhesive labels alone also, they are the largest at 200 Crores after taking over Webtech Labels, Ajanta Packaging and Positive Packaging.
Suresh Gupta
Being an army man’s son Suresh’s childhood was spent at various locations within India. His father who is now 92 years of age, was a paratrooper with artillery from the well-known 17 parafeild regiment of Indian army and retired as Director of Military intelligence. After retirement he was assigned as Director SSB (Special Security Bureau) by the cabinet secretariat. Retiring from SSB he was taken by the Himachal Government to be the chairman of Himachal State Electricity Board. Suresh has a brother who is 9 years younger than him and followed his father’s footsteps to join the army, has primarily headed combat formations, served in the UN Peace Corps and is currently a Major General. Typical of army families, Suresh’s schooling took place at various schools across the country, the last two being St. Georges School, Agra, and St Xavier’s School Delhi where he was in the boarding and finished in 1967 with excellent marks.  Being underage, he could not apply for admission into the IIT or Delhi University colleges, so at the age of 15 years he did a year of pre-engineering at Government college for Men Chandigarh, where the youth in him got the better of him in not attending any classes other than chemistry. He did poorly, much to the disappointment of his father who was posted in Ambala at that time. His mother gave him 200 Rupees and sent him to Delhi to his grandmother. Admissions had closed for most good courses but a good school marksheet helped him get admission for BA economics honours in the prestigious Hindu College Delhi University. He studied hard and in the very first year he got a first division and ranked in the University to win back his father’s confidence. After graduating from Delhi University Suresh went to the Jamnalal Bajaj Institute of Management studies Bombay, which then was considered amongst the best two in the country.



Finishing his MBA, he was motivated and impressed upon by the head of HR department of Jamnalal Bajaj Institute who was also the vice president of Corning Borosil to join Corning Borosil, which he eventually did as a management trainee in 1974. 




 
Suresh and wife Kumi




The following year in 1975 he got promoted and got married to Kum Kum Talwar fondly called Kumi. Kumi graduated from the prestigious Lady Shriram College in Psychology honours and did her Masters in Social Work when she topped her class in Delhi University, and has been Suresh’s close confidante. At a young age of 23 he was posted in Madras as Regional Manager South for Corning Borosil who manufactured custom designed glass reactors for specialised industrial chemical processes, laboratory glassware and consumer ware under brand names Corning, Borosil and Pyrex. Surprisingly his immediate colleague working under him, the Head of Sales and Service was 52 years old. 






 
With daughters Ratna(L) and Shivani(R)
He enjoyed his stint in Madras as it was great learning time there and in 1979 his elder daughter Ratna was born. Post Emergency when the Janta government came to power the then minister George Fernandes came down heavily on US companies. While Coca Cola left the country, Corning was asked to dilute their equity to less than 40%. Suresh Gupta was at this time transferred to Delhi as Regional Manager North with additional responsibility of interacting with government and convincing them to excuse Corning from this equity reduction as a special case. Being a high technology company also supplying critical materials to defence, they were not allowed by USA government to setup ventures where they did not have full control. It was tremendous experience for Suresh, one side interacting with government and other side selling to large industries, government laboratories and finally setting up channel sales for their consumer products. Once it was clear that government of India would not relent regarding equity dilution, the company stopped further capital investment into the country. Now that it was evident that there would be no growth in the company, Suresh decided it was time to move on in life.
He shared his thoughts with a friend at Usha International, who instantly arranged for Suresh to meet Lala Charat Ram of Shriram group. He was taken on board and became Divisional Manager of the Lucknow Division of Usha International, stationed at Lucknow when he was 28 years old with almost 200 people working under him. Usha was selling sewing machines, electric fans and agricultural pumps. This was a challenging job as the market was extremely competitive and majority of the employees i.e. the mechanics, belonged to a militant union and were unionised. The area of operation for him was interesting as criminals and bad elements roamed free there. There are interesting and scary stories of his time spent in those areas. Due to his frequent tours his family at home had to be provided armed security guards due to threats.
Sardari Lal Talwar Founder Paper Products






During this period there was pressure from his wife Kumi’s family to join Paper Products Ltd. the company founded by her father Sardari Lal Talwar.











In the meantime, a close friend of Suresh Gupta from Middle East came visiting him in Lucknow out
of the blue with a first-class open ticket and a proposal to join the Doha headquartered Almana Group whose Chairman wanted an executive director who he could trust to join his Board as there seemed many issues with his existing team. Suresh took the trip to evaluate what was being offered, finding it very exciting he accepted the offer and joined them in late 1982. In due course, various businesses were put under him some of which he started, and seven companies including an IBM agency reported to him. He then was designated as Executive Director-International, he started businesses or had oversight of investments in Saudi, Dubai, Turkey, UK and US. After joining he recruited 16 Indian Managers in his team and parted company with four other Managers already in the company. He spent the next five years in Doha and reminisces of them as fascinating years, as a time of immense learning, travelling all over the world for 15-20 days each month. His younger daughter Shivani was born there. In the beginning of 1987 Suresh and Kumi were reviewing their career and lifestyle. Their eight-year-old elder daughter who was going to British school could not speak a word of Hindi, their mother tongue. They wondered if they should continue to live in the Middle East. The Almana Chairman understanding their dilemma offered to station Suresh in another country of his choice. At this time Suresh was also toying with the idea of taking up an assignment with United Nations but Kumi’s family was persistent and he decided to return to India and join Paper Products. 
Rare picture of Suresh Gupta and father in law Sardari Talwar
In October 1987 Suresh Gupta and family returned to India to join Paper Products as a promoter and he acquired a minority shareholding. As mentioned earlier even though being a legendary company it had problems, the paper mill they had in Roha was sold. Kumi was the youngest child of Sardari Lal Talwar her two brothers were ageing and not keeping well and have since passed away.
Paper Products Limited was founded by Sardari Lal Talwar in 1935 in Lahore, that time in undivided India. Sardari Lal was running one of the four largest departmental stores of India of that time called Moolchand of Lahore with a customer base of Indian royal families and Britishers. The store stocked goods like a modern-day multi product retail and was founded by his Grandfather Moolchand and Uncle Khairati Ram who were also very charitable persons. They were running Hospitals, Schools, Temples and Dharamshalas (subsidised dwelling for travellers). Moolchand Dharamshala in Lahore was just opposite the Lahore Railway Station. The founders passed away at an early age and leaving the business to a young 15-year-old Sardari Lal. Moolchand store was importing milk bottle caps made of paperboard and paper crimped cups for the army till one day a British army officer in charge of the Dairy came to him and suggested that he import the paper and make the caps and pastry crimp cups in India. It would save the army some amounts enabling them to extend their budget. Sardari on advice of his international friends got the hand presses developed in India, imported some dies and punches and started to make the caps and cups in Lahore in 1935. 
To start this maiden manufacturing venture, he emptied one of the Moolchand store warehouses and commenced production with the signboard outside reading, “PAPER PRODUCTS”. He later imported machinery from Windmoller and Holscher Germany in 1939 to start manufacturing paper bags. This was the inception of what is today Huhtamaki-PPL.
Moolchand Hospital Lajpat Nagar, New Delhi
Then came the partition of India, all was lost and left behind in Lahore when the family migrated to Delhi. For all the charitable work that the family did in what was left behind in Pakistan, Sardari Lal was given land in Lajpat Nagar as compensation. He had an emotional need to carry the philanthropic ideals of his parents, so before doing anything else he established the “Moolchand Kharaitiram Hospital” in Lajpat Nagar, South Delhi. He also started making packaging products that he was already doing before. Immediately after world war II in 1948 the Germans were holding the first Drupa, Sardari Lal, travelled by ship to attend where he met and struck friendship with some of the leading packaging people in Europe. Owing to his good reputation, Windmoller and Holscher gave him five Bag making machines with printing, on open credit. He returned to start a factory in Faridabad in 1949 followed by one in Ghatkopar Mumbai. Paper Products started to grow steadily and Sardari Talwar took his company public in 1951 retaining 51% with himself. Paper Products started to grow steadily and Sardari Talwar took his company public in 1951 retaining 51% with himself. 
Thana Factory
Billy Heller owner of Milprint (now a part of Bemis Company, Inc.), then the world’s leading flexible packaging company based in Milwaukee, USA became a dear friend of Sardari Lal. Billy was also a philanthropist wanting to share his knowledge with the world, had set up an organisation called Milprint International Club with global leaders including Paper Products as members. With Milprint’s technical help he built the Thana factory in 1960 to the then world class standards. At this time his elder son Dr. K K Talwar who had done his doctorate in USA at the institute of Paper Chemistry returned to India. A little later his younger son Suresh Talwar completing his master’s in economics from USA, also returned to India. Dr KK Talwar was amongst India’s foremost scientists in chemical technology and paper making, he drove the company’s technology leadership. Suresh Talwar was the dynamic operational business head of the company. Business grew after Thana factory was commissioned, and many small factories were constructed across the country at Madras, Calcutta, Nagpur, Hyderabad and a paper mill in Roha.
Around 1980 things slowed down due to various reasons, the paper mill in Roha got sold, it was a difficult period. In 1987 the family had convinced their son-in-law Suresh Gupta to return to India and join the company. Suresh joined in October 1987 and spent a whole year working hard, travelled extensively in India and around the world to learn the technology and business as also meeting all the major customers and suppliers of PPL to understand the intricacies of their business. By 1989 Suresh was ready with his business plan that included induction of new latest technologies, while very slowly shutting down all factories except Thane. Due to the humane angle they did not abruptly sack people but informed transparently that in 10 years’ time this would happen. This with intention to let ageing employees retire and not add any new ones. However, expansion in Thane factory was kept going on, old machines were phased out and replaced by new ones and the staff from shop floor workers to upwards were given in-house training in latest technologies. Meantime a new cadre of craftsmen trainees, diploma trainees, graduate engineer trainees and management trainees was started with inductions of freshers from ITIs, diploma schools, engineering colleges and management institutes. An elaborate program of in-house training was put in place. The program was designed by Suresh and his colleagues to suit their specific needs may they be technology, customer or people handling. They were transforming the company to project their acumen in offering the latest in packaging. They went digital way ahead of time in 1989 when they started digital scanning and digital engraving of cylinders. They also started to computerise the company ahead of time. A start up consultancy company was recruited to put-in a modern computer hardware and software system (one of the first ERP’s) to replace the old card punch system. While modernising operations in Thana factory he shut down the old printing and wax coating converting lines and installed modern gravure printing and lamination lines making Thana a state of art unit once again. The first metalliser capable of producing certified barrier coatings was commissioned in 1994. There were many things done for the first time in India.
With Amar Chhajed
Suresh continued to add new products and expand his footprints into the world of packaging and in one of his frequent travels in 1990 he saw shrink labels in Japan. He established contact with the Fuji Seal Chairman Masaki Fujio, the global inventor of shrink sleeve and became the only licensee of Fuji Seal for shrink sleeve manufacturing in 1991. At around the same time he was discussing Therimage label technology with Dennison, later merged with Avery to become Avery Dennison. This technology enabled labels to be printed on a coated film and transfer the images on to the bottles eliminating the need for release liners. PPL installed the Therimage label production facility in Thana. Therimage was a challenge for Avery’s core business of pressure Sensitive adhesive products, so they bought Dennison and killed the Therimage business. Suresh saw the future of Therimage with Avery was not bright, so he shifted focus to pressure sensitive labels where the growth looked inevitable. PPL invested in an Aquaflex Label press and they were into manufacturing PSA labels at the Thana factory in 1994. In later years wanting to grow in labels business, since he was not finding enough of the right people and expertise to expand, he decided to buy expertise. For this reason, he bought Amar Chhajed led Webtech Labels, the leader in pharma labels in India. Then, Suresh extended his reach in fmcg by buying Chandan Khanna led Ajanta Packaging as well. In between he had acquired Positive Packaging which though large in flexibles had also taken over the labels business of SGRE in Bangalore. Therefore, now they have pressure sensitive label production in Mahape, Baddi, Rudrapur, Thana, Daman, Hyderabad and Bangalore.  


 
Silvasa Factory
Being a first-time entrant into some of the evolving technologies he had to develop global suppliers and was instrumental in their eventually coming India. By 1994 Suresh was wanting to build another world class factory, despite resistance coming from the family which still held 51%, he went ahead with his plans for building it in Silvasa. PPL made a rights issue to raise the money to build the factory and enhance the working capital for growth. Construction began in the 12 acres property in 1995 and in one year the unit was in production for mainly flexible packaging including shrink sleeves. They made profit in the first year itself. Paper Products Ltd was growing at breakneck speed ranging between 20-30% per annum.
In 1998 Suresh bought the Hyderabad unit of Gautam Thapar, Ballarpur Industries which had been 
Hyderabad Factory
setup as a joint venture with A and R, a leading European flexibles company. The unit was completely refurbished and new capacity was added. Hyderabad became the centre for wrap around labels. Meanwhile the company had made another rights issue to fund growth and the family’s holdings reduced to 32% as some members did not exercise their options. To fund the continued growth and expansion Suresh wanted to do yet another rights issue and wanted the family to increase their holding. But the younger generation were pursuing other professions, so it was decided to bring in an outside investor in synergy with PPL’s business. Van Leer and Huhtamaki combination which eventually merged to be one entity became the major investor chosen from amongst many options. Rather than the family selling its shares, PPL’s share base was doubled and the foreign partner directly invested into the company through preferential allotment of shares equivalent to 51% of the enhanced equity on 16 July 1999.
The company now with Huhtamaki as the new majority shareholder continued to aggressively pursue growth. Huhtamaki worldwide as a Euro 3 billion consumer packaging major had almost 100 companies across the globe. In 2001 and again in 2005, the Huhtamaki Board awarded PPL with the most exclusive and prestigious award of “Best Company of the Year”. PPL also received the “Most Innovative Company of the Year” award. Meanwhile Suresh was awarded the globally best “Manager of the Year” award, a unique honour.
Consequent to new fiscal incentives being announced by Government for Uttarakhand, a huge factory was built yet again on a 12-acre plot and commissioned at Rudrapur which again made a profit in the first year of production, and PPL continued with growth.
Huhtamaki wanted Suresh Gupta to head Huhtamaki’s global flexible business which he was hesitant to accept as he had no interest in moving out of Mumbai. However, he accepted to take the responsibility for Asia Oceania, operating from his base in Mumbai for three years. Finally, Huhtamaki removed his objection to running the group’s global flexible packaging business by telling him he could run it from his Bombay office. He had to accept the responsibility and ran the global business as an EVP and member of the Executive Board for Huhtamaki for six years. Thereafter he reverted to be the Executive Chairman for PPL but stepped down from his role as a promoter and simultaneously as per Huhtamaki’s desire he sold his shareholding to Huhtamaki.




Meantime industry peers honoured him with a Lifetime Achievement Award and Print Week, based on a readership vote. ranked him number 1 in the top 100 ranking of individuals in the industry. In Feb 2018, Suresh handed over day to day running of HPPL to the new Managing Director while he focused on tying up Board issues.
 






On 31st December 2018, Suresh Gupta retired and left the company that he so fondly nurtured.
 

In recent years, as a hobby, Suresh has been a supporter of socially beneficial enterprises from start-up stage and of businesses with purpose. He is also deeply interested in Art. He plans to intensify his work here and run a packaging industry advisory from his new office in Bandra. He would be happy to be of help to industry colleagues. He also plans to continue his active role in the “Indian Flexibles and Folding Cartons Association of India (IFCA)”. He leaves behind for his successors in HPPL his philosophy for success: “Sound fundamentals are enshrined in Good values; being Good compassionate people, knowing knowledge is power to be used with integrity, ever improving quality and service and continuous innovation makes for happy customers. Be the flag bearer of standard in your industry”.

Suresh Gupta can be reached at his email: suresh.gupta20@gmail.com

Print Publications are free to reproduce this article by compulsorily giving credit to author and mentioning blog address http://harveersahni.blogspot.com 
 

Written by Harveer Sahni Chairman Weldon Celloplast Ltd. January 2019

Labels diversifying into different tangents

Labels diversifying into different tangents
Label is primarily information appended to a product or its packaging giving the brand name, information on the product, its usage, safety instructions, manufacturer’s details, statutory information, prices and now bar codes that provide a system for track & trace, price information, inventory control and logistic support. How the label or the required information has been attached to the product has varied over the ages. The earliest form of labeling was done by etching, embossing or stamping brands and information directly on glass or metal containers. Labels have been in use for hundreds of years but labels as we know today have evolved largely after the 17th century. Printing originated in China in the 11th century and was further developed in Korea in the 12th century but a wooden block printing press for mass printing was invented by a German Johannes Gutenberg in the mid-15th century.  It was only in the earlier part of 18th century that printed paper labels surfaced as a possibility but since adhesives to affix these labels were not available, their usage started later. By then lithography had developed, so directly metal printed containers started being used for packing and canning. Many products are still packed with modern canning processes using metal cans printed with the lithographic printing process. It was only in the 19th century that printed paper based labels started being used for labeling and packaging using natural gum based adhesive to stick the paper labels to glass, metal or paper based containers and packaging. These labels in an evolving label scenario are now referred to as Wet Glue Labels.
 
With increasing levels of literacy, growing population and growth of packaged products, mass production in factories has become an imperative. New glass, paper, metal and plastic based packages are being developed to catch the eye of demanding consumers. The aesthetics are enhanced by affixing colourful and attractive labels. Faster labeling and packaging methods evolved as also the need to have highly decorated labels to service the need of consumers. Driven by this demand labels have evolved into different tangents. Diverse and technical labeling technologies have emerged. Listed below are some of the prominent technologies that labels have presently evolved into;
  1. Pre printed labels on metal container
  2. Wet Glue Labels
  3. Self Adhesive Labels  
  4. Self adhesive Liner less Labels 
  5. Heat Transfer Labels
  6. Direct on product screen printed labels 
  7. Contact printing and stenciling
  8. Laser  engraved labels 
  9. Metal anodized labels 
  10. Shrink Sleeves 
  11. In Mould Label 
  12. Digital: Direct on product Labels 
  13. 3D Printed labels 
Pre printed labels on metal containers: Metal containers or cans are made from tin plate (steel

covered in a thin tin layer) or of Aluminum and steel coated with a lacquer. The labeling is done in any of the three different ways listed below;

 

 

  • Metal tinplate sheets are printed by offset process and then converted into containers.

 

 

  • Preformed round metal containers are printed using a curved surface printing machine. Each color of ink is placed on a different (plastic letterpress) plate, and then transferred to a single rubber blanket which re-transfers the inked image to a can allowing all colors to be printed at a time followed by ink curing and varnishing.
  • Preprinted labels of paper, film or foil are laminated to preformed cans. These labels can be printed by, flexo, offset, gravure, or digital printing processes. These can be highly decorated on high end hybrid narrow web presses having advanced finishing capabilities. These labels can be applied as full wrap around labels or part labels with the balance surface left coated to show a metallic lustrous effect.

Wet Glue Labels: These labels are also referred to as glue applied labels. These formed the mainstay
of product labeling until well into the middle of last century. Labels initially printed on letter press machines and later on offset presses, were gummed manually and applied to the bottles or containers.  In 1880 De La Rue came up with a machine for gumming labels but this had a problem as paper labels would curl as soon as they would come out with gum applied on it making it difficult to handle.  From my personal experience I can cite example of how our company adapted to manual gumming of labels. Our parent company was established in 1939 to produce fountain pen inks and office adhesive that were packed in glass bottles. To achieve optimum level of production we devised an interesting method of applying glue and labeling. Those days the final packing was done in wooden cases, corrugated boxes came much later. We took a wooden crate and turned it upside down, spread a full roll of surgical cotton on it and then covered it with a thick cotton cloth that was tightly fixed by nailing it all around. This was then dipped into water overnight with its face downwards. In the morning we would squeeze out the water and our gumming pad was ready. A thin solution in water of natural gum (Gum Acacia) that grows on trees was applied on the pad and then labels spread on it. We would have the unlabelled bottles on one side of this pad and with a little gum on the finger, which made it a little tacky, lift the evenly gummed label off the pad and place it on the bottle without any curl and put on the other side for further packaging.  Subsequently with development of high solid faster drying Dextrin based adhesive automatic machines to apply gum and dispense labels to the bottles were developed. This made large scale production on automated production lines possible.
 
 
 Direct on product screen printed labels: Screen printing saw growth in the Indian label scenario in the middle of last century. A lot of consumer product that shifted from glass to plastic packaging also opted for screen printed containers. However this did not last for many years as self adhesive labels with the high end decoration they offered soon became the preferred option. However screen printing on container is still in use but has limited application.
 
 
Self Adhesive Labels: In 1935 “Ray Stanton Avery” developed the self adhesive label also referred
to as Sticker or Pressure Sensitive Label. This label revolutionized the way how the world branded and labeled their products. The label basically consists of a face stock which could be paper film or foil, coated with a tacky non drying adhesive and protected with a backing also referred to as release liner. The label after printing and die cutting just needs to be lifted off the release liner and placed on the product achieving instant bond on applying pressure, unlike the wet glue labels that need drying after application otherwise they would shift and look bad. The self adhesive label industry has over the years evolved to offer a diverse range of labels catering to various industries and applications that include fmcg products, lubricants, cosmetics, food, Pharmaceuticals,  variable information, logistics, brand protection, etc. In the initial years these labels were printed and die-cut on slow flat bed letterpress presses and with time they are now printed on high speed flexo rotary or combination label presses with capability to decorate and finish the labels in line in a single pass delivering finished labels at the end of the line. These labels are used on high speed label dispensing machines adding to production volumes for end user.
 
Self adhesive Liner less Labels: Self adhesive labels as described above have an issue as regards the
environment. The release liner and waste matrix after die cutting is not generally recyclable, though efforts are being made in this direction. This waste goes either to the landfills or is incinerated impacting the environment adversely in both cases. Moreover if the liner can be done away with while converting this type of label, it will amount to cost saving and become eco friendly. Considerable amount of work has been done in this direction and various options are now available. The simplest one being to make a tape like product printed, and siliconised on one side and adhesive coated on the reverse and self wound. However these labels that can be cut with sharp corners, cannot be die cut and dispensed in regular labeling equipment. Many European and US based food companies are already using such liner less labels. There is development being done to overcome the challenges of die-cutting complex shapes and dispensing cost effectively.
 
 
 
Heat Transfer Labels: PET film that is precoated with special release lacquer is reverse printed by flexo, offset or gravure to form labels in roll form. The image is transferred onto the container or product using heat and pressure. The labels are a composition of inks and lacquers selected so as to perform to customer’s specific needs. On transfer these labels are just the image and no substrate is transferred. Many years ago Mumbai headquartered Paper Products Limited (now Huhtamaki PPL) commissioned this technology known as “Therimage” with help of Avery Dennison. Later with self adhesive label emerging as  very decorative in presentation, this technology lost its popularity. In recent times it has resurfaced. It is extensively being used by the pen industry.It is now being extended to garments and other product segments.

 

 

 


Contact printing and stenciling: In present times even the corrugated shipper cartons bear self
adhesive labels needed for identification, inventory control and logistic requirements. In earlier days as I mentioned, wooden cases were used as shipper cartons. People would write on them using marker pens but when need for aesthetics became important stencils were made of tin plate. They were placed on the wooden cases and ink brushed over them to imprint the required information. Later when corrugated boxes started to be used for final packaging, roller contact printers with changeable rubber types and foam ink rolls were available to print the information that could be changed by changing the type faces as per need. Once corrugated cartons replaced the bulk of outer packaging, these cartons started to be printed and self adhesive labels applied, if needed. Stenciling is still used where wooden crates are required for final packaging.
 
Laser engraved labels: Steel or other metal auto components, like bearings need to be branded, they cannot be labeled with paper or film labels. Only the secondary packaging can be branded, this can amount to duplication and counterfeits. For this reason laser engraved branding is preferred. A laser beam which is a very small, focused point of laser power effectively superheats a tiny point of a surface and removes part of the surface, creating a permanent engraving. This beam of light is controlled and moved to create a brand name or permanent design.
 
 
 
 
Metal anodized labels: These labels are used in applications where permanent product identification
is critical such as equipment nameplates, signage, safety/warning plates, machine control panels, etc. Abrasion and corrosion resistance anodized aluminum labels are produced by chemical etching on photo sensitive anodized Aluminum. These are mostly riveted on to the equipment or panels as they are required to last most of the life time of the equipment.
 
Shrink Sleeves: Shrink sleeves offer 360 degrees space for decoration and product information. They are made of either of these materials; Polyester, PE, PVC or PP. Pre printed film is welded to form a tube, cut to desired size of the bottle or container and applied over it. It is then exposed to a heat gun or passed through a heated shrink tunnel for the tube to shrink and attain the form of the bottle or container providing all around decoration. Shrink sleeve labels originated in 1965 and invented by Fuji Carpentry shop that were later named as Fuji Seal. The actual large scale usage of these sleeve labels commenced in the mid 1980s. According to Suresh Gupta Chairman of Huhtamaki PPL, shrink sleeves were brought to the Indian market in 1991 when Paper Products Limited (now Huhtamaki PPL), set up the plant with help from Fuji Film to make these in India. This segment continues to register a steady growth rate. Global growth is 6-7% but in India it is slightly more, given the size of the market. In India these are largely printed on gravure printing presses. However in recent times, in an effort to cater to short run customers who maybe large customers doing special editions or small and medium enterprises, printing is also being done on flexo presses and in some cases on digital label presses.
 
In Mould Labels: Paper or film printed labels (mostly filmic) are placed inside the moulds during
the molding process. After placing the label, molten plastic is injected into the mould. On cooling the label is fused with the resin, takes the shape of the so molded container and becomes an integral part of it. The labels referred to as IML can be printed and decorated by any of the processes i.e. Offset, Flexo Gravure or digital. The end result is a highly decorated container. These IML applied containers are used for Ice cream, butter, paints, food packaging, etc. According to research firm MarketsandMarkets, the global in-mold label (IML) market is projected to grow from $2.58 Billion in 2015 to $3.23 Billion by 2020, at an estimated CAGR of 4.54%. It is the fastest growing segment amongst the various label segments.
 
 
 
Digital, direct on product Labels: Digital printing has made its presence in all variants of label
printing and converting. From wet glue to self adhesive and in mould labels, digital printing is making inroads everywhere. Some years ago when I was interviewing Helmut Schreiner, the former Chairman of Schreiner Group, I asked him, “What do you see as the biggest threat to self adhesive label industry?” He became pensive and after deep thinking said, “It will be digital printing direct on the product”! It makes a lot of sense as we see the market slowly evolving in that direction. This will open up a whole lot of opportunities for the brand owners. No paper, no silicone, no adhesive, no dies, no tooling and yet the option to indulge in personalization and creativity! According to AlexanderWatson Associates, “It may, indeed, be a disruptive technology”. Direct to digital has been around for some time printing on textiles and ceramics. It is commonplace to see digitally printed fabrics and ceramic tiles. It has started to make inroads into the consumer product market and we need to wait and watch where it leads to.
 
 
 
3D Printed labels: This is another technology which may see computer controlled 3D characters and images on products and labels. It will make the imagination go wild on what all can be created. It is a process in which layers of material are formed under computer control process to create an object that can be of almost any shape formed by deposits of binder material onto a powder bed with inkjet printer heads layer by layer.
 
 
 

The evolution of labels has created a whole bouquet of technologies which still keep coming up in new avatars. No one technology can become the predominant one for label production. With labels diversifying into different tangents, label printers need to select the way forward so as to stay innovative and ahead of time. It is surely time to emerge out of the crowd and create a separate visible entity.
 
Written Exclusively for Label and Narrow Web magazine USA by Harveer Sahni, Chairman Weldon Celloplast Limited, New Delhi November 2017. The article may not be reproduced without the magazine's or the author's permission.

Avery Dennison: 20 eventful years in India

Avery Dennison: 20 eventful years in India
www.averydennison.com
Living in a rented chicken co-operative, a young American poverty stricken man in his early 20s worked as a night clerk to fund his education. He stopped school and went to live for a year in China, where he gained experience working with a printing press. He returned to USA after the year, graduated and desperately tried his hands at various business options, he even sold smoked bananas! He then took on a morning job at a flower shop and later in the day started to experiment on various small things in a 100 square foot place nearby. He came up with the idea of making self sticking labels. With the printing press experience behind him he saw the vision to start his new venture. With no money of his own, he borrowed 100$ from his fiancée, Dorothy Durfee, who later became his wife, to invest in his startup business. Using a washing machine motor, parts of a sewing machine and a saber saw, he developed the world’s first self adhesive label cutting machine. In 1935 he started his maiden venture Kum-Kleen Adhesive Products Co which would be the mother enterprise of the world’s largest labelstock company Avery Dennison Corporation and this poor man was"Ray Stanton Avery!"
In the first balance sheet of the company on 31st December 1935, the total assets stood at 958.82$ and Stan Avery’s capital at 488.77$.
The company was later renamed Avery Products Corp. based in Pasadena USA. In 1990 it was merged with Dennison Manufacturing of Framingham, Massachusetts, a firm that made and marketed adhesive label products as well as glue sticks, felt markers and other office supplies through such chains as Home Depot and Staples. It came to be known as Avery Dennison Corporation. The business so acquired from Dennison Manufacturing, became the Office and Consumer Products Division. This business along with their “Designed and Engineered Solutions” business was later sold to their largest customer CCL Industries Inc. for 500 Million USD.
R Stanton Avery
R Stanton Avery died in 1997 at the age of 90 years. At that time the company had 16,000 employees and annual sales of $3.2 billion. As of 2016, Avery Dennison’s sales were 6.09 Billion Dollars with manufacturing and distribution presence in over 50 countries, product sales in 90 countries and 25000 employees worldwide. They are ranked 427 in the list of Fortune 500 companies.
Raj Gopal Srinivasan
As western markets started showing signs of saturation and slowing growth rates, Avery Dennison took a strategic decision to invest in emerging markets.Chinaand India being home to over 37% of the world population became the obvious destinations to invest into. The China investment happened in 1994-95 and investments into India followed soon after. Indian pressure sensitive labels market was still in a nascent stage and the potential of this technology had neither been fully unraveled or exploited. Wet glue labels were largely prevalent. Manual labeling or wet glue applicators were in use with most brand owners. An Avery Dennison team, led by Ron, set up its base in India. Raj Gopal Srinivasan was appointed the first General Manager to build and to lead a motivated team. Under his dynamic leadership the first team of 25-30 employees gave shape to the project and in March 1997Avery Dennison India Private Limitedcommenced operations as a part of Asia Pacific Division of Avery Dennison Corporation.
The initial operations were started in a leased facility at Narsinghpur Industrial Area, Gurgaon with a single slitter to slit and distribute material imported from their units outside India. Given the size of the country and the label industry spread in small numbers across all regions, it was gigantic task with a limited team to achieve levels of business that would do justice to their stature as a multinational. Raj and his team did an excellent job by building personal rapport and relationship that extended bonding not only to the company managements but also to the families of owners. It was relationship selling at its best. A setup that was based entirely on imports was difficult to sustain as custom duties were high, foreign exchange fluctuated and rules were stringent. The input cost variations made stable selling prices a challenge.The management at Avery Dennison soon realized the imperative need to produce locally. A one meter wide hotmelt adhesive coater was installed in January 1998 to produce stocks with imported raw materials. The initial staff had a perfect team spirit instilled in them and motivated to achieve more with less resources.
Mahesh Pathak
A few of those initial team members of Raj Srinivasan are still working with Avery Dennison.Mahesh Pathak, joined in 1997 asone responsible for entire process and quality of plants. He was instrumental in setting up the entire department from scratch and commercialized all products locally with success. He was responsible for the organization to be the first certified Six-Sigma BB in whole of Asia-pacific region. He is also responsible for having lead the expansion and setting up of all plants. He has risen to be theSenior Operations Director – South Asia Pacific and Sub-Saharan Africa (SAP and SSA).Umesh Agrawal, joined in 1997 as materials manager and over the years took up different responsibilities in the organization. Heading the operations from 2001-2003, Head of business and product development 2003-2006, Director-Supply Chain and Product Development 2006-2012, Director Supply Chain 2012-2014 South Asia and South Africa and now Director Supply Chain, Asia Pacific.Muralie KS, a Chartered accountant joined the team later in 2008, he is the Finance Director of the company.Sailesh Kapur joined Avery’s team in January 2008, he built up a strong connect with customers and also shaped up the present structure of their sales organization. Other members of Raj Srinivasan’s team who also contributed to making a strong foundation for the project but later left the organization includeDhiraj KapurandKapil Anand.
Once local production started, business did begin to settle down, however high duties and political uncertainty in country drove the company to start innovating and develop products based on local inputs manufactured to their stringent specifications and quality control systems. In 2001, Avery Dennison started to siliconize their own release liners and started to produce adhesive locally. This exercise of localizing and reducing dependence on imports along with lean manufacturing to economies of scale helped the company to offer products at affordable prices. Avery Dennison also took upon themselves to educate brand owners about the benefits of usingPressure Sensitive Adhesives(PSA) labels and about the consistency of the quality from Avery Dennison products. This not only brought additional business to them but helped to grow the market size in the country. Once the business situation settled down, by 2004 Avery Denison India was on a steady rate of double digit growth. It was time to make significant investments in technology and people as also to contribute to the expansion of PS market in India. It was also time to expand.
Avery Dennison Plant in Pune
In 2007 land admeasuring 22 acres was acquired at Ranjangaon near Pune for expansion. In 2008 the facility was ready to go into production with a one meter hotmelt coater, with capability to run at 500 meters per minute with inline silicon coating, this compared to the first one meter coater at Gurgaon that could run at 250 meters per minute. The facility was inaugurated by Dean Scarborough, the previous global CEO and President of Avery Dennison Corporation. An interesting story of his visit is that Dean flew into Mumbai on company’s private jet from where he came to Pune in a helicopter. The pilot of the helicopter lost way and landed in fields nearby and Dean had to be brought in by a private car. In 2010 having paved the path for stable growth and leaving behind a legacy of service to the customers as a primary focus, Raj Srinivasan left for USA. He had inculcated in a culture at Avery Dennison India of going to any extent to honour commitments and deliver top-notch service. It is his legacy that 95% of genuine requirements are serviced within 36 hours. The legacy has been carried on and improved upon by the teams that have succeeded him. Good planning, in-time supplies, exact sizes and good forecasting specially with imported materials, has become a way of life for the supply chain teams now. “97% of these targets are met and we are assessed and rated as per the 36 hour target” says Vivek Kumar, who is heading the Supply Chain at Avery Dennison. He further adds, “Stringent quality control and consistent quality makes us deliver to happy customers!” With the depart of Raj Srinivasan to the USA,Anil Sharmawas appointed to head the Indian operations.
Anil Sharma
Anil Sharma brought in a new wave of professionalism. Building the foundation and establishing the fundamentals from a startup, needs a lot of personal human intervention, which was well delivered by Raj and his team. The company under Anil Sharma gradually started to move from being men driven to systems driven and building up to the next level of expansion and growth. Implementing the systems for order registration, timely delivery, payments collection and addressing customer concerns. All these processes started to become systemized while still maintaining the personal connect. 2011 was an eventful year for Avery Dennison in India. Another 1.5 meter hotmelt adhesive coater was installed at the Pune facility to enhance production capacity. Since they already had a production facility in North in Gurgaon and also in the West at Pune, a need was felt for having a stock point South India to make just-in-time supplies to customers in the south, adhering to the legacy of excellent customer service delivery. A slitting facility was also commissioned in Bangalore in 2011.
Inauguration of Innovation and Knowledge center PUNE
In the same yearAvery Dennison Knowledge centerwas set up in Bangalore. It was largely felt by Anil Sharma and his team that there was a dire need of training in the Indian label industry. There is also an acute shortage of trained manpower in the industry that was steadily growing with increasing population. High numbers of educated young people are coming out of universities getting employment and in turn creating a huge market for retail and eventually labels. According toJitesh MehtaDirector Product development, “This knowledge centre was created to be a brand neutral platform, purely to impart knowledge to converters and to their employees”. In recent times Avery Dennison has helped trained many young boys in collaboration with the Indian label association,LMAIhas also helped some of them with placement in label manufacturing companies. This centre aims to impart skills and not to do any brand promotion.The knowledge center has recently been shifted to Pune because they already had their Research and Development center there. It was synergy to have the Research and Development center and knowledge center at the same place.

With substantial investment made in 2010-11 they had surplus capacity and capabilities in their hands. Avery started to invest in the South Africa and other African markets to expand the sale of their products in these countries. Marketing team was hired locally in these countries while finance and back-end support is handled in India. It is interesting to note that they were the first among the organized global labelstock manufacturing companies who invested in these markets. Avery Dennison has in recent times also endeavored successfully to expand their reach to countries around India selling their products to Srilanka, Pakistan, Bangladesh and Nepal as well.
In 2014 to expand further and augment its range of products offered, Avery Dennison India installed another coater at Pune. This time, it was an emulsion adhesive coater of 1.50 meter width. With increased manufacturing capacity and capabilities a bigger range of products is now being offered to their customer base. According to Vivek, who heads the supply chain management in South Asia, Avery Dennison’s bulk of the production i.e., about 350-400 SKUs comes out of the Pune facility. Gurgaon plant now complements the total production most of which is rolled out from the Pune plant. Solvent based adhesive products are still imported and sold wherever required. 95% of all products sold by Avery Dennison in India are made in India complying with the Prime Minister’s call to “Make in India”. 20 years ago they were largely reliant on imports and now only 8-10% material is imported, rest is all manufactured in India.
Pankaj Bhardwaj
In 2015 Anil Sharma was elevated to take up larger responsibilities as Vice President and General Manager, South Asia Pacific and Sub Saharan Africa. His team-matePankaj Bhardwaj, became his successor as Commercial Director-South Asia, Labels and Packaging Materials. Later this year in 2017 Pankaj was entrusted with a larger role as Senior Director & General Manager-South Asia at Avery Dennison India Pvt Ltd. Pankaj became a perfect combination of Raj’s legacy of relationship building and Anil’s professionalism. While maintaining close co-operation with converters, most of whom are running family owned businesses, he leads his team to interact with brand owners advising them on decoration, value addition on labels to keeping them updated on the latest trends. Avery Dennison continues to invest in technologies and new business areas likeRFID, specialty tapes, reflective products and sustainable manufacturing. They are also investing time and money in advising printers on new decoration and converting techniques as also helping expansion of the PSA label markets to smaller towns of India.
Pankaj feels that it is good that more labelstock manufacturers are coming into the market. It maybe challenging in view of depleting margins but if that makes the market size to grow, it is welcome. Avery Dennsion looks at India as one of the fastest growing markets and they are willing to continuously invest here. Proof of their commitment is evident from setting up of R&D center, Knowledge Centre, support to LMAI, support to technical workshops and label awards, etc. Adjacent technologies do present a challenge; Shrink sleeves growing at the same rate as PSA labels, IML is a niche not very wide spread and Digital is to be watched. Indulgence in digitally printed label segment is fast becoming an imperative. Despite the market dynamics Avery Dennison India in the last 5-7 years is achieving a CAGR (Compound aggregate growth rate) of double digits.


Recyclability and waste management are industry challenges. As an environmentally consciouslyCorporation, Avery Dennison has published its global sustainability goals. Avery Dennison India is making steady progress to support these goals by having all Indian sites FSC certified and more than 50% paper sourced from FSC certified sources. Also, all Indian sites are more than 99% landfill free.

Company is continually redesigning its products to reduce carbon footprint and promoting 25 mic PET liners given thatpaper liners are largely 60-62 gsm substance and are extremely difficult to recycle. PET is recyclable thereby reducing the impact on environment.

Corporate social responsibility is getting increasing focus for Avery DennisonIndia. Company has multiple programs in the areas of women empowerment, children health and education. Among other programs, Avery Dennison Foundation runs a program by the name of 'Avery Dennison Spirit Of Inventions' in collaboration with six universities by recognizing and rewarding innovative ideas from students in the field of science, engineering and technology.




Written by Harveer Sahni Chairman, Weldon Celloplast Limited, New Delhi August 2017
Printing magazines and publications may reproduce this article giving credit to author.
For advertising on this blog please email toharveersahni@gmail.com

History of Indian Label Industry part 2D

History of Indian Label Industry part 2D

This is the final part of History of Indian Label Industry” up to third quarter of 2019 written by the author. The history would look incomplete if mention was not made of those who started their label journey from scratch or very humble beginning and then rose to a pinnacle achieving success not only in the home market but also internationally and continue with their journey to greater heights.

From the start of new Millennium in 2000 until the time of writing this part of the history, enormous changes have come about in the Indian label industry. Label printing companies who started from virtually nothing, grew and spread to multiple locations. Some of the bigger ones on the way, decided to sell out to or partnered with foreign companies who were entering the Indian market for label manufacturing. Label, being a miniscule portion of the total packaging cost of a product, does not deliver very large turnover as compared to that of package printing or flexible packaging companies.

However, it does generate relatively higher profit margins than that of high turnover package printing industry. For this reason, we did not see any label companies in the earlier part of the new Millennium who could reach a coveted target of Rupees 100 Crore or a Billion Rupees as annual sales turnover. However, some packaging companies or multinationals who invested in labels as well, were above this figure. It was incredible that at least three Indian startup companies who started their business purely with stickers that later evolved as labels, grew to cross Rupees 100 Crores turnover or more in 2018-2019.

First among them is Manish Desai led Mudrika Labels. Sandeep Desai working at a greeting cards company started trading in stickers that he outsourced in 1975 and a year later he started screen printing them at home. His 10-year-old cousin, Manish was always excited to see stickers being made. In 1977 Sandeep moved his sticker manufacturing to a 500 square feet factory in Malad.

In 1985 they started outsourcing pregummed sheets and get them printed on offset to finally finish them to be stickers at their factory. They grew and expanded into packaging, making cartons and corrugated boxes. Sandeep eventually moved into packaging and the young Manish who had labels in his heart, in 1996 expanded into labels with Kopack label presses and later many Gallus presses. He further expanded integrating backwards to produce self-adhesive labelstocks and collaborated with a Korean company to produce heat transfer labels. By 2019 Mudrika labels were working out of 100,000 square foot shop floor, 550 workforce to achieve a Rupees 160 Crore (1.60 Billion Rupees) annual sales turnover.

The second person to achieve this Kuldip Goel of Any Graphics started from very humble beginnings. At a tender age of 14 years he started making stickers by screen printing manually himself to earn some money while still in school. He did this in his one room home. Despite extreme hardships in life he remained honest and focussed on providing the best in quality and indulging in innovation. In 1989 he started his maiden venture Stickline in Noida. By start of the millennium Kuldip’s company Any Graphics was recognised as one of the best label manufacturers in quality and one that never cut prices to get orders but prove their innovative capabilities to convince customers. From mere screen printing he went on to add dome labels and letterpress printed labels in his portfolio. In 2009 he moved to a 100,000 square feet clean sanitized dust free factory adding, Heidelberg Offset Presses, Orthotecs and a fully loaded Omet flexo and screen combination label press. He also became one of the largest makers of rigid boxes.

By 2019 he had crossed the Rupees 100Crore sale without compromising profit margins and becoming one of the most awarded companies in India. In 2019 he commenced construction of a certified green factory spread over 15000 square meter plot size and 250,000 square feet shop floor.

 The third printer who grew in similar pattern, a stout follower of Lord Shiva who greets people with, “Jai Bhole Ki” (Victory to Lord Shiva, lovingly referred to as Bhole) Sanjeev Sondhi, started his career as a medical Representative and carried on in the profession switching jobs until 2005 when he decided to trade in Barcode labels, printers and accessories.

He was looking for bigger things in life! Two years later in 2006 he launched his maiden start-up venture Zircon Technologies India Limited with a Mark Andy 2200 Label press in Dehradun. Being a salesperson himself he drove the company in fast mode expansion and in a few years added multiple Mark Andy and Omet label presses which include the high-end combination Omet Vary flex 430mm. In just 15 years of inception Zircon crossed the Rupees 100 Crore reaching 120 Crores annual turnover mark coming purely from label manufacturing, “a record in itself”! While other successful label companies at this stage would look for foreign suitors, Zircon in 2019 was the first totally indigenous label manufacturing company planning to go public to raise capital for future expansion. They got the approval from SEBI in November 2018 with plans to open a 90-100 Crores public issue. Waiting for an appropriate time to launch their public issue Zircon continued to grow and invest in expansion. Sanjeev hoped to invest 80 percent of the receipts in expanding labels business while the rest in other allied products. Sanjeev was even looking at inorganic growth by indulging in Mergers and Acquisitions. With 3 factories in Dehradun and one in Chennai Sanjeev Sondhi aims to grow multi-fold with blessing of Bhole (Lord Shiva).

Having achieved such success through sheer commitment and hard work it is natural for companies like the three mentioned above to look at other avenues in synergy with their business to achieve a faster growth. All the above, while they continued to be proud of their beginnings and aware of the evolution, started to study or invest in new technologies. 

 We had reached a time when multiple labelling technologies surfaced, and future had many surprises in store. From the primitive times when a label had to be either tied to a product or riveted on to it or affixed with a wheat flour paste, we believed to have reached a pinnacle when self-adhesive or pressure sensitive adhesive labels that were developed and grew to establish as a predominant labelling technology. Initially it was the manually applied wet glue adhesive paper labels that were in use. With development of starch and dextrin-based glues and availability of automatic wet glue labelling equipment, wet glue labels became the most widely used method of labelling. Most of the organised industry employed packaging lines incorporating wet glue labelling. It was used in all segments like pharmaceuticals, Liquor, cosmetics, oils and in fact most of the products that were packed in glass bottles or metal cans. When plastics, mostly HDPE (High Density Polyethylene), started to evolve as a preferred packaging material for glass bottles and cans due to ease of manufacturing, reduction of freight due to lighter weight per can, possibility to produce in different shapes and colours, labelling with starch or dextrin based adhesive became a challenge. This change was taking place during the 1970s and 1980s. Since HDPE is a low energy material, paper labels with water-based adhesives made from various gums, starches and dextrins would not anchor on to the containers or would fall off in transit. Labels with pressure sensitive adhesives or stickers had already started being made initially by screen printing methods and later by offset printing, these labels would stick well just by application of pressure. They did not have to wait for drying and could be packed instantly after labelling while the wet glue labels would have adhesives oozing out on the sides and attracting dust and shifting in packing process, adversely affecting the aesthetics. More and more companies were opting for these stickers.

Towards the end of last century self-adhesive labels evolved in roll form and the automatic labelling equipment for pressure sensitive adhesive labels became available. Many companies did resist shifting from wet glue to self-adhesive due to the high cost of label applicator replacements.

This is a big challenge that the likes of printers mentioned above faced and yet with their firm resolve they became a part of the change that brought them success. As the retail became dependent on customer choices and there was need for better decorated labels, self-adhesive labels became the preferred labelling technology and grew at fast pace. In between screen printing on containers also started but a slow process that did not have much decoration as compared to printed labels, it did not grow as a preferred process. Self-adhesive grew so much that it became almost 50% of all the labels produced in India. As we entered the new millennium and started looking also into future the thought process for future of labels is becoming extremely diverse and evolving in different tangents. Shrink sleeves came in to take away a big market share given the possibility of 360 degrees visibility. Wrap around labels also became extensively used in the beverage segment. Heat transfer label technology that had originated as Therimage Label technology developed by Dennison Manufacturing company in USA in the 1990s did not flourish then because Avery, who acquired Dennison, did not promote it as it was not in sync with their core business of self-adhesive labels. Once the patents expired, the Heat Transfer Labels or HTL reappeared in the second decade of new millennium and started growing. In mould labels is another labelling technology that had found usage in many segments and started registering growth in large volume usage. At this time, I try and link the changes to the three above who understood the need to expand the scope of labels in their business portfolio. While Mudrika as I mentioned invested in heat transfer labels, Any Graphics into innovative labels and rigid boxes and Zircon also started moving into brand security and innovative packaging including spiral wound containers.

Around this time environmental concerns also impacted the self-adhesive label industry as almost 50% of the converted product is waste going to landfills. Much work was being done on this to reduce the liner tonnage by opting for thinner filmic liners that can be recycled and by developing linerless labels.

Digital printing on to the products is another technology that may replace some of the usage of self-adhesive labels. All said and done, the sheer market size in India and the inertia, brings business to all label technologies and for this reason the self-adhesive labels market continued to grow at double digit rates. The industry will keep evolving both in terms of quality and innovation as also taking environmental concerns in its stride.

In over a year, as another decade ends, the author will update the history on the outcome of such endeavours. The total History as chronicled by the author until now is now available on this blog on links as below:
Part 1: https://harveersahni.blogspot.com/2010/08/history-of-indian-label-industry.htmlPart 2A: https://harveersahni.blogspot.com/2019/07/history-of-indian-label-industry-part-2a.htmlPart 2B: https://harveersahni.blogspot.com/search?q=History+part+2bPart 2C: https://harveersahni.blogspot.com/2019/08/history-of-indian-label-industry-part-2c.htmlPart 2 D: Above
Written by Harveer Sahni Chairman Weldon Celloplast Limited New Delhi July/September 2019
Note: No one is authorised to reproduce, copy or reprint this article until permitted by the author in writing.